Afficher la notice

dc.contributor.authorLaramée, Arnaud
dc.contributor.authorLanthier, Catherine
dc.contributor.authorPellerin, Christian
dc.date.accessioned2021-06-28T17:42:21Z
dc.date.availableMONTHS_WITHHELD:12fr
dc.date.available2021-06-28T17:42:21Z
dc.date.issued2020-09-23
dc.identifier.urihttp://hdl.handle.net/1866/25310
dc.publisherAmerican Chemical Societyfr
dc.subjectFibersfr
dc.subjectElectrospinningfr
dc.subjectCrystallinityfr
dc.subjectMolecular orientationfr
dc.subjectProperty optimizationfr
dc.subjectRaman spectroscopyfr
dc.titleElectrospinning of highly crystalline polymers for strongly oriented fibersfr
dc.typeArticlefr
dc.contributor.affiliationUniversité de Montréal. Faculté des arts et des sciences. Département de chimiefr
dc.identifier.doi10.1021/acsapm.0c00873
dcterms.abstractElectrospun nanofibers (NFs) often demonstrate an exponential increase in mechanical and other properties at reduced diameters. Molecular orientation emerges as a key parameter for the performance of amorphous and low crystallinity polymers, but single-fiber structural investigations are still lacking for highly crystalline polymers. Herein, polarized confocal Raman spectroscopy reveals that fibers of highly crystalline poly(ethylene oxide) (PEO) maintain a high orientation over a broad range of diameters, in strong contrast with the usual exponential trend. This observation stands for five electrospinning solvents of widely different properties. By comparison, poly(oxymethylene) (POM) NFs also show a high orientation at low diameters, but it decreases substantially for diameters larger than ∼1400 nm, a result attributed to the lower crystallinity of POM compared to that of PEO. The results show that the exponential orientation dependence on fiber diameter is not universal and stress the importance of polymer crystallinity on the structure and properties of electrospun nanofibers. This work guides the preparation of fibers with optimal orientation-dependent properties and shows that high crystallinity can afford more robust materials whose performance is less affected by variations in experimental conditions, a valuable feature for most applications.fr
dcterms.isPartOfurn:ISSN:2637-6105fr
dcterms.languageengfr
UdeM.ReferenceFournieParDeposant10.1021/acsapm.0c00873fr
UdeM.VersionRioxxVersion acceptée / Accepted Manuscriptfr
oaire.citationTitleACS Applied polymer materialsfr
oaire.citationVolume2fr
oaire.citationIssue11fr
oaire.citationStartPage5025fr
oaire.citationEndPage5032fr


Fichier·s constituant ce document

Vignette
Vignette

Ce document figure dans la ou les collections suivantes

Afficher la notice

Ce document diffusé sur Papyrus est la propriété exclusive des titulaires des droits d'auteur et est protégé par la Loi sur le droit d'auteur (L.R.C. (1985), ch. C-42). Il peut être utilisé dans le cadre d'une utilisation équitable et non commerciale, à des fins d'étude privée ou de recherche, de critique ou de compte-rendu comme le prévoit la Loi. Pour toute autre utilisation, une autorisation écrite des titulaires des droits d'auteur sera nécessaire.